Connect with us


How to Fix a Vacuum Cleaner With No Suction – 3 Steps


how to fix a vacuum cleaner with no suction

No one likes it when their vacuum cleaner stops working—especially if it has lost its suction. Thankfully, fixing a vacuum with no suction may be easier than you think. Here are some tips on how to get your vacuum back up and running quickly and easily.

1. Check the Filter

The first step you should take if your vacuum is not sucking up dirt properly is to check the filter. Depending on the type of vacuum, there may be a few different filters that need cleaning or replacing. If you’ve had your vacuum for a long time, it could be time for a new filter.

2. Clean the Hose and Brush

If the filter looks fine, it’s time to check the hose and brush of your vacuum. Remove the hose and check for any clogs or blockages, then take apart the brush head to make sure that all dirt and debris has been removed. Even small pieces of dirt and hair can reduce the amount of suction.

3. Replace Belts

If all else fails, you may need to replace the belts on your vacuum cleaner. Over time, these belts can wear out and cause a decrease in suction power. Replacing the belts is relatively easy and affordable, so if your problem isn’t solved by cleaning the filter and hose, this could be your solution.

How to fix a hoover vacuum cleaner with no suction? 4 Steps

If your hoover vacuum cleaner is having no suction, there are several steps you can take to try and resolve the issue.

1. Check Vacuum Plugin

Check that the vacuum is plugged in correctly. If it looks like everything is connected properly then make sure the power switch is flipped on.

2. Remove clogs

Disconnect the hose from the vacuum and remove any clogs that might be restricting air flow. If there are no clogs in the hose, check the wheels for debris or dirt that may be blocking the suction.

3. Replace Bag

If everything seems clear, make sure your vacuum bag is not full. If it is, replace it with a new one to improve suction.

4. Check the Brush Roll

If none of these steps have worked so far, you may need to check that the brush roll on your vacuum is spinning properly. If it isn’t, remove any debris or string wrapped around it and see if that helps.

By following these steps, you should be able to fix your hoover vacuum cleaner with no suction and get it back up and running in no time.


If you have a vacuum cleaner with no suction, don’t panic! You can usually fix this problem quickly and easily by checking the filter, cleaning the hose and brush head, or replacing any worn-out belts. With the right knowledge and a little elbow grease, you can get your vacuum back to its full suctioning power in no time