How to Use a PS4 Controller on Xbox One

How to Use PS4 Controller on Xbox One

When connecting a PS4 controller to an Xbox One, the CronusMAX PLUS adapter is recommended since it is one of the more dependable methods of connecting the controller and console.

1.Installing the drivers for the CronusMAX PLUS is as simple as plugging it into a computer that is connected to the internet.

2.After the CronusMAX PLUS software has been installed on the computer, launch the Cronus PRO programme and select Tools > Options > Device from the menu bar.

3.Configure the output protocol to Xbox One, which is represented by the letter XB1 in the drop-down list at the top of the menu.

4.Make certain that the Enable DualShock 4/Wiimote Bluetooth searching box is selected in the Settings menu.

5.Remove the CronusMAX PLUS from your PC and connect it to one of your Xbox Ones using the USB connector on the back of the device. Once you’ve completed this process, the CronusMAX PLUS will begin to display the letters “AU” on its LED display, which stands for “Authentication.”

6.Take the batteries out of your Xbox One controller and set them aside. If any Xbox One controllers are attached to the console, the signal from the Xbox One controller may overrun the signal from the PS4 controller.

7.Then, disconnect the Xbox One controller and check for the standby animation on your CronusMAX PLUS once the number has appeared on the screen. In terms of appearance, this will seem as two parts of a circle revolving around the display.

8.A USB cable is required to connect your Xbox One controller to the CronusMAX PLUS device. The adapter’s display should change from “AU” to “0” when this occurs.

9.Connect a Bluetooth 4.0 USB adapter to the CronusMAX PLUS using the included USB cable.

10.Hold down the SHARE and PS buttons on your PlayStation 4 controller at the same time.

11.As soon as the controller begins to flash white, this indicates that it is looking for a connection; it should be able to locate the CronusMAX PLUS. This should result in the light bar changing from a solid colour to a solid colour after a few seconds.

12.Look for the number on the CronusMAX PLUS to go back to “0” on the display screen once more. Once this has been completed, the controller should be linked and ready to be utilized.

How to Disable Bluetooth Searching

In the event that you wish to use your PlayStation 4 controller with your Xbox One in the future and do not want to go through this procedure again, you may disable Bluetooth searching so that the device remains attached. Bluetooth searching may be turned off to make subsequent connections easier, allowing you to begin gaming much more quickly. Here’s how you can turn it off:

1.Connect the CronusMAX PLUS to your computer to have access to Cronus PRO.

2.Double-check that the box labelled “Enable Dualshock 4/Wiimote Bluetooth searching” is not ticked.

3.Steps 5 through 9 from the previous section should be repeated.

4.To activate the PS button on the PS4 controller, press it.

5.Steps 11 and 12 should be followed. This is the moment at which your PlayStation 4 controller should be recognized by the Xbox One.

Video