How to Program RCA Universal Remote

One of the most well-known brands of universal remote controllers that may be used with a wide variety of home appliances is RCA. Most of RCA’s universal remote controls come with a handbook that you can use to locate the code corresponding to your television set. Fortunately, purchasing an RCA universal remote can help you reduce the number of remote controls you need (or replace one that you’ve misplaced) without breaking the bank. The company manufactures a variety of universal remote controls, each of which may be customized for use with a certain TV, DVD player, VCR, cable box, and even the most cutting-edge streaming gadgets like Apple TV and Roku. In the following paragraphs, you will learn how to program an RCA Universal Remote:

Read Also: How to Remove Remote Management From iPhone/iPad

How to Program RCA Universal Remote

With a Code Search Button:

1. Make sure there is a “Code Search” button on your remote by pressing it. This is typically located at the top of your remote, and the words “Code Search” should be located either above or below it.

2. If your universal remote has that button or choice, entering the code for the device you want to connect would be the simplest way to do so. Connect your device using another method if your universal remote has no control or option.

3. If you do not see this button, proceed to the following part below.

4. Start by turning on your TV and the other electronic item you intend to use your remote control. While pushing the button on the device you want to pair, press and hold the Code Search button. For instance, if you’re trying to link your remote with a new TV, select the TV key on the remote. Pressing the code search button on your remote simultaneously as the DVD button on your player will allow you to pair your remote with a DVD player. The indicator light on the remote will flash once and continue to glow persistently.

5. While holding down the button on the device, enter the code using the number pad on your keyboard. Hold down the DVD button on your remote control while entering the code using the number pad on your remote control. This is necessary if you are trying to link your remote with a DVD player. After inputting the correct code, the light should automatically turn off.

6. It is important to check the functionality of each button on the remote control.

You can perform a code entry search as a backup strategy if the device’s code does not function. This tool allows you to look through all available codes until you find one that works properly in your game.

How to Use Direct Code Programming

The auto-programming feature does not always produce the desired results. The RCA universal remote control comes with a codebook with thousands of codes from virtually every TV maker. To take advantage of it, please proceed as follows:

1. Examine the codebook section under “TV Device” provided with the RCA Universal Remote.

2. Locate the brand of your television in the codebook.

3. Make a circle around the possible codes.

4. If you continue to press and hold the TV button, the power indicator will light up.

5. Maintain your hold on the TV button while using the RCA Universal Remote’s numeric buttons to enter the code that has been marked. For an LG Television, the code 11423 is an example of a code.

6. You have successfully entered the right code if the power light continues to glow after you input it. If the light blinks four times, you must try entering the code again.

7. Let go of the TV button when the correct code has been entered is safe.

8. Perform tests on the different functionalities, such as checking the volume and going through the menu.

FAQs

How do I reset my RCA universal remote?

You need to reset the remote. First, remove the batteries from the remote control, and then, to reset the microprocessor that is housed within the remote, press and hold the “1” key for several seconds. After releasing the number 1 key, you should then push the ON•OFF key before replacing the batteries. If the indicator light comes on, you will need to reprogram the remote and try again.

Where is the code search button on RCA universal remote?

This is typically located at the very top of your remote, and the words “Code Search” ought to be located either above or below it. If your universal remote has that button or choice, entering the code for the device you want to connect would be the simplest way to do so. If your universal remote does not have that button or option, you will need to connect your device using another method.

Does RCA have a universal remote?

The RCA 4-Device universal remote is the answer to your remote Replacement or consolidation needs. It is quite probably the most comfortable remote you’ll ever hold, and it has simple setup and support for practically every major brand of gadgets. If you’re looking for an answer to your remote demands, go no further.

Can you connect TV without remote?

To accomplish this, simply go to the Google Play Store (if you have an Android TV) or the App Store (if you have an Apple TV) and download and run the necessary application. Now that that’s out of the way, you’re free to utilize any and all of the capabilities made available to you by these innovative programs.