How to Fix Bad HDMI Port on PS5

You can still use your PS5 even if HDMI port is broken and in this guide we will show you how you can repair or fix a bad HDMI post on PS5.

If your PlayStation 5’s HDMI port is damaged, you won’t be able to connect the console to your TV. This can be a big problem, especially if you just got your PS5 and were looking forward to playing some of the new games on it.

The good news is that there are a few things you can try to fix a damaged HDMI port on your PS5. While we can’t guarantee that these methods will work for everyone, they’re definitely worth a try if you’re having this issue.

First Method to Fix Bad HDMI Port on PS5

1. First you need to confirm that issue is with your port or with your HDMI cable you can follow these steps to check is your port is working fine?
2. Make sure that the HDMI cable you’re using is properly plugged into both the PS5 and the TV. Sometimes, a loose connection can cause problems like this.
3. If the cable is plugged in tightly and you’re still having issues, try unplugging it and then plugging it back in again. This can sometimes reset the connection and fix the problem.
4. Try HDMI cable with other available devices at your home.
5. Another thing you can try is using a different HDMI cable. If you have another one lying around, see if that works better than the one you’re currently using.

Second Methd to Fix Bad HDMI Port on PS5

If none of the given above methods work then you would need to replace your PS5 bad HMDI port You can watch the video given below to replace HDMI port.

You can order from Amazon here PS5 Port kit and watch this video tutorial. You can also read manual given below.

If your PlayStation 5’s HDMI port is broken, you’ll need to replace it. Use this guide to learn how to replace the HDMI port on your PS5.

What You will Need:

• Phillips screwdriver
• Flathead screwdriver
• Soldering iron and solder
• A replacement HDMI port (available online)

Step 1: Begin by removing the PS5’s top panel. There are four screws holding it in place, two on each side. Use a Phillips screwdriver to remove these screws and set them aside.

Step 2: Next, locate the PlayStation 5’s HDMI port. It’s located on the back of the console, near the bottom.

Step 3: Use a flathead screwdriver to pry up the metal plate covering the HDMI port. Be careful not to damage the port itself.

Step 4: Once the plate is removed, you’ll be able to see the broken HDMI port.

Step 5: Carefully desolder the broken port from the motherboard. You’ll need to use a soldering iron and some solder for this.

Step 6: Once the broken port is removed, you can solder in the replacement port. Make sure that it’s securely connected to the motherboard.

Step 7: Finally, replace the metal plate over the HDMI port and screw it back into place. That’s it! Your PS5’s HDMI port should now be working properly.

Third Method to Fix Bad HDMI Port on PS5

If your HDMI port is broken on your PS5, you will need to get a replacement from Sony. You can do this by contacting Sony customer support or by taking your PS5 to a Sony service center. If you have warranty coverage, you may be able to get a free replacement. Otherwise, you will likely have to pay for the replacement out of pocket.

PS5 HDMI port replacement cost

You can get help from Sony and cost is around $200 to replace bad HMDI port of PS5.

Finally, if none of these methods work, you may need to get your PlayStation 5 repaired or replaced. Unfortunately, this is the only way to fix a damaged HDMI port on the console.

What to do if your hdmi port is broken on ps5

In the meantime, you can still use your PS5 by connecting it to a TV via an HDMI cable. However, you will not be able to take advantage of the PS5’s 4K capabilities or use any of the PS5’s advanced features. Additionally, you may experience some input lag when playing games.

If you are playing games on a 4K TV, you may want to consider downscaling the resolution to 1080p. This will allow you to take advantage of the PS5’s other features while still being able to enjoy your games in 4K. To do this, go to Settings > Sound and Screen > Video Output Settings > Resolution and select 1080p.

PS5 Ports Guide

The PlayStation 5 has two USB Type-A ports on the front of the console, as well as an HDMI port and a digital audio output. On the back of the PS5, there are two more USB Type-A ports, an Ethernet port, and a power input. You should take care of these ports and never plugin with force in these ports. Always use these ports gemtly to avoid issues in future.

Conclusion

We hope this article helped you learn how to fix a damaged HDMI port on your PS5. If you have any other questions or comments, please feel free to leave them below.