Connect with us

Apple

How to Turn On Apple Watch That Won’t Turn On

Published

2 years ago

There are a number potential causes for your Apple Watch not turning on, in the event that this occurs. A dark screen doesn’t mean tragedy. Even if you have already tried charging your Apple Watch over night, the majority of issues can be resolved in a short amount of time.

Read Also: How to Make Your Apple Watch Vibrate

How to Turn On Apple Watch That Won’t Turn On

Check the battery, and check your Apple Watch charger

The lack of a functioning battery is one of the most common explanations for why an Apple Watch won’t turn on. Connect the Watch to the charger that came with it, and if it doesn’t work, make sure you try another charging cable and charger to determine whether or not the problem is with your charger.

If, after attempting to charge it with a variety of different chargers, your Apple Watch is still unresponsive, you should go to the next possible option.

Perform a force restart

It’s possible that your Apple Watch is frozen. It is possible to unfreeze the operating system and get things running normally again by forcibly restarting it. While doing so, simultaneously press and hold both buttons (the bigger, circular Digital Crown button and the smaller, rectangular Side Button button) for a period of ten to fifteen seconds.

After the Apple logo has appeared, you can now let go of the buttons and wait for a few more seconds. When the watch is turned back on, its functionality should be restored immediately.

Turn off Power Reserve mode

There is a feature on your Apple Watch called Power Reserve that, as the name suggests, conserves battery life. In this mode, the watch will only show the time, and it will not unlock for any other function.

To exit this mode, press and hold the Side Button (which is more elongated and thinner) for approximately seven to ten seconds. When you see the Apple logo on the screen, it means that the watch has successfully returned to its normal mode.

FAQs

Why won’t my Apple Watch turn on or restart?

It is possible that you will need to reset your Apple Watch manually if you are unable to power down your device or if the issue persists after you have done so. You should only carry out these steps if you are unable to restart your Apple Watch. To perform a hard reset, press and hold both the side button and the Digital Crown at the same time until the Apple logo displays. This should take at least ten seconds.

Why is my Apple Watch screen black and wont turn on?

It’s possible that the battery in your watch has been completely drained, in which case it will need to be recharged until it has accumulated enough battery life to turn itself on. Having said that, you should now attach your Apple Watch to the charger that came with it and allow it to charge for around half an hour. On the display of the watch, there ought to be an indicator for charging.

Why isn’t my Apple Watch turning on after being dead?

The battery has run out on the smartphone.

The fact that the battery in your Apple Watch is dead is probably the most obvious explanation for why it will not turn on. Without the liquid within, it’s nothing more than a glorified bracelet. To our good fortune, this is the problem with the simplest solution. It just takes forty-five minutes to fully charge the Series 7 from zero to eighty percent.

How do I fix an unresponsive Apple Watch?

To do a hard reset on your Apple Watch, press and hold the side button as well as the Digital Crown for at least ten seconds. After that time has elapsed, you can let go of both buttons and your Apple Watch will restart.

Why is my Apple Watch not lighting up?

If your Apple Watch does not wake up when you elevate your wrist, check to see that you have chosen the correct orientation for both your wrist and the watch. It’s possible that your Apple Watch needs to be charged if tapping the display, pressing the Digital Crown, or turning it doesn’t cause it to wake up.

Related Topics:

Trending